There are affiliate links for Amazon included in the post below. If you click on them and make a purchase I will receive a small commission at no extra cost to you. Thank you for your support :)
Below you will find the free pattern for the Be Together Beanie!
Hi, its me, Emily at Crochet Aweigh! The Be Together Beanie is part of the Jump Then Fall Collection. Keeping with the Swiftie theme, Jump Then Fall is a song from Taylor Swift’s Fearless album. “Jump Then Fall” is a song about a carefree summer love, where Taylor reassures her partner that she will always be there for them, no matter the difficulties they face. The lyrics encourage the person to take a leap of faith and trust in their relationship, with Swift promising to “catch” them if they fall, both literally and metaphorically. The song is known for its upbeat and happy, feel-good country-pop vibe. What better time of year to glean inspiration from this song than the Fall time!
Although you may have noticed…This is not a very warm hat. This hat is merely here for the vibes! It is not going to keep you very warm! I live in Florida, so I am always on the hunt for patterns that I can wear in the warmer weather. It is just a day before Thanksgiving and it is 75 degrees out! But I want to dress cute for Fall! I don’t want to miss out on all the adorable cooler weather fashion so I find myself writing patterns with that in mind.
This yarn is Island Sport from Beach Bunny Yarns. This is currently my favorite sport weight wool to use. It is so soft and squishy! Beach Bunny Yarns is based out of Ormond Beach, FL. They do an amazing job of offering coordinating colors in all their lines. I used Cider and Thankful for this beanie, but further down this page there are a few other color ways that would also make for an amazing beanie!
If you would like to support my very lofty yarn dreams then you can purchase a PDF of this pattern from my site, Etsy, or Ravelry.
If you like this beanie, check out the shawl in the same collection at this link!
Pattern Notes:
- This hat is worked in the round, without turning.
- I crochet tight, so you may want to check gauge with a smaller hook first.
- A chain 3 DOES count as a double crochet stitch.
- A chain 1 does NOT count as a stitch.
Materials:
- Sport Weight (2) yarn: 62 yards of Color 1 and 114 yards of Color 2.
- Sample used Island Sport by Beach Bunny Yarns, a 100% Superwash Merino. Cider as Color 1, and Thankful as Color 2
- US size F/3.75 mm crochet hook
- Soft Tape Measure
- Tapestry Needle
- Scissors
- The Be Together Pattern: either free on this page, or paid on my website, Etsy, or Ravelry.
Abbreviations:
Ch – Chain
Sl St – Slip Stitch
Sc – Single Crochet
Hdc – Half Double crochet
Dc – Double Crochet
C1 – Color 1
C2 – Color 2
BLO – Back Loop Only
Rnd – Round
Special Stitches
Gauge:
Gauge is the first 6 rows of the hat = 4″ across unblocked.
Pattern Instructions:
Rnd 1: With C1, Ch 5, sl st to form ring. Ch 1, 12 hdc into ring. Sl st to 1st st and fasten off.
Rnd 2: Attach C2 with a sl st to any hdc. Ch 3, dc in same, ch 1, 2 dc in same, sk 1 hdc, *(2dc, ch 1, 2dc) in next st, sk next hdc. Repeat from * around. Sl st to begch3. 24 dc and 6 ch1sps.
Rnd 3: Sl st into 1st ch1sp, (ch 3, 1 dc, ch 2, 2 dc) into 1st chsp. Ch 3, sk 4 dc, *(2dc, ch 2, 2dc) into next ch1sp, ch 3, sk 4 dc. Repeat from * around. Sl st to begch3. 24 dc, 6 ch2sps, 6 ch3sps.
Rnd 4: Sl st into 1st ch2sp, (Ch 3, 2dc, ch 2, 3dc) into same chsp, Ch 1, sc in ch3sp, ch 1,*shell into next ch2sp, ch 1, sc in ch3sp, ch 1. Repeat from * around. Sl st to begch3, fasten off C2. 6 shells, 6 sc, 12 ch1sps.
Rnd 5: With C1, sl st to ch2sp of any shell. *Ch 7, sk to next ch2sp and sl st in it. Repeat from * around. Sl st to 1st. 6 Ch7sps.
NOTE: Your work will start to curl, but it will work itself out in the next rows.
Rnd 6: Ch 1, hdc in same sp, hdc in each ch and sl st around. Sl st to 1st hdc. Fasten off C1. 48 hdc.
Rnd 7: Attach C2 to any hdc that is in a sl st of the previous round. (ch 3, 2dc, ch 2, 3dc) into same st, Ch 3, sk 3 hdc, *Shell in next hdc, ch 3, sk 3. Repeat from * around. Sl st to begch3. 12 shells, 12 ch3sps.
Check Gauge now! You should have 4″ across after row 6.
Rnd 8: Sl st into 1st ch2sp, (ch 3, 2dc, ch 2, 3 dc) into same sp, ch 4, sk ch3sp, *Shell in next ch2sp, ch 4, sk ch3sp. Repeat from * around. Sl st to begch3.
Rnd 9: Sl st into 1st ch2sp, (ch 3, 2dc, ch 2, 3dc) into same sp, ch 2, sc over top of ch3sp of round 7 and ch4sp of round 8, ch 2, *shell in next ch2sp, ch 2, sc over top of ch3sp of round 7 and ch4sp of round 8, ch 2. Repeat from * around. Sl st to begch3. Fasten of C2.
Rnd 10: With C1, sl st to ch2sp of any shell. *Ch 5, sk to next ch2sp and sl st in it. Repeat from * around. Sl st to 1st.
Rnd 11: Ch 1, hdc in same sp, hdc in each ch and sl st around. Sl st to 1st hdc. Fasten off C1. 72 hdc.
Rnd 12: Attach C2 to any hdc that is in a sl st of the previous round. (ch 3, 2dc, ch 2, 3dc) into same st, Ch 6, sk 5 hdc, *Shell in next hdc, ch 3, sk 5. Repeat from * around. Sl st to begch3. 12 shells, 12 ch6sps.
Rnd 13: Sl st into 1st ch2sp, (ch 3, 2dc, ch 2, 3 dc) into same sp, ch 6, sk ch6sp, *Shell in next ch2sp, ch 6, sk ch6sp. Repeat from * around. Sl st to begch3.
Rnd 14: Sl st into 1st ch2sp, (ch 3, 2dc, ch 2, 3dc) into same sp, ch 3, sc over top of both ch6sps of rounds 12 & 13, ch 3, *shell in next ch2sp, ch 3, sc over top of both ch6sps of rounds 12 & 13, ch 3. Repeat from * around. Sl st to begch3. Fasten of C2.
Rnd 15: With C1, sl st to ch2sp of any shell. *Ch 6, sk to next ch2sp and sl st in it. Repeat from * around. Sl st to 1st.
Rnd 16: Ch 1, hdc in same sp, hdc in each ch and sl st around. Sl st to 1st hdc. Fasten off C1. 84 hdc.
Rnd 17: Attach C2 to any hdc that is in a sl st of the previous round. (ch 3, 2dc, ch 2, 3dc) into same st, Ch 6, sk 6 hdc, *Shell in next hdc, ch 3, sk 6. Repeat from * around. Sl st to begch3. 12 shells, 12 ch6sps.
Rnd 18: Sl st into 1st ch2sp, (ch 3, 2dc, ch 2, 3 dc) into same sp, ch 6, sk ch6sp, *Shell in next ch2sp, ch 6, sk ch6sp. Repeat from * around. Sl st to begch3.
Rnd 19: Sl st into 1st ch2sp, (ch 3, 2dc, ch 2, 3dc) into same sp, ch 3, sc over top of both ch6sps of rounds 17 & 18, ch 3, *shell in next ch2sp, ch 3, sc over top of both ch6sps of rounds 17 & 18, ch 3. Repeat from * around. Sl st to begch3. Fasten of C2.
Rnd 20: With C1, sl st to ch2sp of any shell. *Ch 6, sk to next ch2sp and sl st in it. Repeat from * around. Sl st to 1st.
Rnd 21: Ch 1, hdc in same sp, hdc in each ch and sl st around. Sl st to 1st hdc. Fasten off C1. 84 hdc.
Rnds 22 – 24: Ch 1, hdc blo in each st around. Sl st to first.
Weave in all ends. Wet Block if desired. Your Beanie is done!
I hope you love your new Be Together Beanie! Comment below if you have any questions, and if you make this Beanie please post it on social media and tag me so I can see! I love seeing your creations!